UNI-T MSO/UPO2000 Series Programming Manual page 102

Programming Manual
:SBUS:LIN:PARity:DISPlay { {1|ON} | {0|OFF} }
:SBUS:LIN:PARity:DISPlay?
Functional description：

This command is used to set LIN bus ID parity bit of the oscilloscope, which can set to ON (yes) or OFF (no).
Return format：

Query returns 1 or 0, it respectively represents ON of OFF.
For example：

:SBUS:LIN:PARity:DISPlay ON
:SBUS:LIN:PARity:DISPlay?
:SBUS
:LIN:DATA:LENGth
Command format：

:SBUS:LIN:DATA:LENGth:DISPlay { {1|ON} | {0|OFF} }
:SBUS:LIN:DATA:LENGth:DISPlay?
Functional description：

This command is used to set LIN bus ID whether set data length of the oscilloscope, which can set to ON
(yes) or OFF (no).
Return format：

Query returns 1 or 0, it respectively represents ON of OFF.
For example：

:SBUS:LIN:DATA:LENGth:DISPlay ON
LIN bus decoding sets the data length.
:SBUS:LIN:DATA:LENGth:DISPlay?
:SBUS
:LIN:DATA:LENGth
Command format：

:SBUS:LIN:DATA:LENGth <length>
:SBUS:LIN:DATA:LENGth?
Functional description：

This command is used to set the length of LIN bus setting data of the oscilloscope, setting data length is
opend by default when using this instruction.
<length>: data length, it is integer data type, range is 1~8.
Return format：

Query returns data length.
For example：

:SBUS:LIN:DATA:LENGth 6
:SBUS:LIN:DATA:LENGth?
:SBUS:LIN:QUALifier
Command format：

Instruments.uni-trend.com
LIN bus decoding ID includes parity bit.
Query returns 1.
:DISPlay
Set LIN bus decoding setting data length to 6.
Query returns 6.
Query returns 1.
MSO/UPO2000 Series
102 / 156