UNI-T MSO/UPO2000 Series Programming Manual page 137

Programming Manual
Query returns phase scale of bode diagram, unit is°.
For example：

:BODe:PHASe:SCALe
:BODe:PHASe:SCALe
:BODe:PHASe:OFFSet
Command format：

:BODe:PHASe:OFFSet
:BODe:PHASe:OFFSet
Functional description：

This command is used to set phase offset of bode diagram.
< offset > can take value from -180°~180°.
Return format：

Query returns phase offset of bode diagram, unit is °.
For example：

:BODe:PHASe:OFFSet
:BODe:PHASe:OFFSet
:BODe:DISPlay:AUTO
Command format：

:BODe:DISPlay:AUTO
Functional description：

This command is used to set automatic display of bode diagram.
For example：

:BODe:DISPlay:AUTO
:BODe:FREQuency:STARt
Command format：

:BODe:
FREQuency :STARt <freq>
:BODe:
FREQuency :STARt?
Functional description：

This command is used to set start frequency of bode diagram display.
Return format：

Query returns sweep start frequency of bode diagram, unit is Hz.
For example：

:
:BODe FREQuency:STARt 1 kHz
Set start frequency of bode diagram display to 1 kHz.
:
:BODe FREQuency:STARt?
:BODe:FREQuency:END
Command format：

:BODe:SWEep:
Instruments.uni-trend.com
10
?
<offset>
?
10
?
END
FREQuency :
<freq>
Set phase scale of bode diagram to 10°.
Query returns 1.000e001.
Set phase offset of bode diagram to 10°.
Query returns 1.000e001.
Atuomatic display bode diagram.
Query returns 1.000e003.
MSO/UPO2000 Series
137 / 156