UNI-T MSO/UPO2000 Series Programming Manual page 46

Programming Manual
This command is used to set slop trigger type, which includes POSitive (rising) and NEGative (falling).
Return format：

Query returns {POSitive|NEGative}.
For example：

:TRIGger:SLOPe:SLOPe POS
:TRIGger:SLOPe:SLOPe?
:TRIGger:SLOPe:TIME
Command format：

:TRIGger:SLOPe:TIME
:TRIGger:SLOPe:TIME?
Functional description：

Set the time of slop trigger mode.
Return format：

Query returns the current time interval, unit is s.
For example：

:TRIGger:SLOPe:TIME 1
:TRIGger:SLOPe:TIME?
:TRIGger:SLOPe:TIME:UPPer
Command format：

:TRIGger
:TRIGger
Functional description：

This command is used to set the upper time limit of slope trigger.
Return format：

Query returns the upper time limit, unit is s.
For example：

:TRIGger
:TRIGger
:TRIGger:SLOPe:TIME:LOWer
Command format：

:TRIGger
:TRIGger
Functional description：

This command is used to set the low time limit of slope trigger.
Return format：

Query returns the current time interval, unit is s.
For example：

Instruments.uni-trend.com
<time>
:SLOPe :UPPer
:TIME <time>
:SLOPe :UPPer
:TIME ?
:SLOPe :UPPer
:TIME 1
:SLOPe :UPPer
:TIME ?
:SLOPe :LOWer
:TIME <time>
:SLOPe :LOWer
:TIME ?
Set slop trigger as POSitive.
Query returns POSitive.
Set the time interval of slop trigger mode to 1s.
Query returns 1.000e000.
Set the upper time limit of slope trigger to 1s.
Query returns 1.000e000.
MSO/UPO2000 Series
46 / 156