UNI-T MSO/UPO2000 Series Programming Manual page 85

Programming Manual
:SBUS:RS232:STOP:BIT
Command format：

:SBUS:RS232:STOP:BIT {1 | 2 }
:SBUS:RS232:STOP:BIT?
Functional description：

This command is used to set RS232 bus stop bit of the oscilloscope.
Return format：

Query returns {1 | 2 }.
For example：

:SBUS:RS232:STOP:BIT 6
:SBUS:RS232:STOP:BIT?
:SBUS:RS232:DATA
Command format：

:SBUS:RS232:DATA <value>
:SBUS:RS232:DATA?
Functional description：

This command is used to set RS232 bus trigger data of the oscilloscope. Binary character data presented
by parameter 0 or 1, its range is related to the value set by instruction :SBUS:RS232:DATA:BIT, which is
[0~2^databit – 1].
Return format：

Query returns binary data format.
For example：

:SBUS:RS232:DATA "01111111"
:SBUS:RS232:DATA?
:SBUS:RS232:QUALifier
Command format：

:SBUS:RS232:QUALifier {BEGFrame | ERRFrame | ECCError | DATA}
:SBUS:RS232:QUALifier?
Functional description：

This command is used to set RS232 bus trigger condition of the oscilloscope.
Return format：

Query returns {BEGFrame|ERRFrame|ECCError|DATA}。
For example：

:SBUS:RS232:QUALifier ERRF
:SBUS:RS232:QUALifier?
Instruments.uni-trend.com
Set RS232 stop bit to 6.
Query returns 6.
Set Set RS232 bus data to 0x7F.
Query returns 01111111.
Set RS232 bus condition to ERRFrame.
Query returns ERRFrame.
MSO/UPO2000 Series
85 / 156