UNI-T MSO/UPO2000 Series Programming Manual page 136

Programming Manual
This command is used to set gain scale of bode diagram.
<scale> can take value from 1~500dB.
Return format：

Query returns gain scale of bode diagram, unit is dB.
For example：

:BODe:GAIN:SCALe
:BODe:GAIN:SCALe
:BODe:GAIN:OFFSet
Command format：

:BODe:GAIN:OFFSet
:BODe:GAIN:OFFSet
Functional description：

This command is used to set gain offset of bode diagram.
< offset > can take value from -250dB~250dB.
Return format：

Query returns gain offset of bode diagram, unit is dB.
For example：

:BODe:GAIN:OFFSet
:BODe:GAIN:OFFSet
:BODe:PHASe:DISPlay
Command format：

:BODe:PHASe:DISPlay
:BODe:PHASe:DISPlay
Functional description：

This command is used to turn on/off phase display of bode diagram.
Return format：

Query returns phase display status of bode diagram.0 represents phase display is not open. 1 represents
phase display is opened.
For example：

:BODe:PHASe:DISPlay
:BODe:PHASe:DISPlay
Query returns 1, it represents phase display is opened.
:BODe:PHASe:SCALe
Command format：

:BODe:PHASe:SCALe
:BODe:PHASe:SCALe
Functional description：

This command is used to set phase scale of bode diagram.
<scale> can take value from 1°~180°.
Return format：

Instruments.uni-trend.com
10 Set gain scale of bode diagram to 10 dB.
? Query returns 1.000e001.
<offset>
?
10
?
{{1 | ON} | {0 | OFF}}
?
ON
?
<scale>
?
Set gain offset of bode diagram to 10 dB.
Query returns 1.000e001.
Turn on phase display of bode diagram.
MSO/UPO2000 Series
136 / 156