UNI-T MSO/UPO2000 Series Programming Manual page 134

Programming Manual
:BODe:AMPLitude<n>
Command format：

:BODe:AMPLitude<n>
:BODe:AMPLitude<n>
Functional description：

This command is used to set amplitude of bode diagram.
<n> can take value from 1~8；<amp> can take value from 10mV~3V.
Return format：

Query returns 1.000e-003, unit is V.
For example：

:BODe:AMPLitude1
:BODe:AMPLitude1
:BODe:SOURce:OFFSet
Command format：

:BODe:SOURce:OFFSet
:BODe:SOURce:OFFSet
Functional description：

This command is used to set DC offset of bode diagram source.
< offset > can take value from 0V~1V.
Return format：

Query returns DC offset of bode diagram source, unit is V.
For example：

:BODe:SOURce:OFFSet
:BODe:SOURce:OFFSet
:BODe:SOURce:LOAD
Command format：

:BODe:SOURce:LOAD {50OHM | HIGH}
:BODe:SOURce:LOAD
Functional description：

This command is used to set impedance of bode diagram source.
50OHM represents the impedance is 50Ω; HIGH represents the impedance is high impedance.
Return format：

Query returns
For example：

:BODe:SOURce:LOAD HIGH
Set impedance of bode diagram source to
:BODe:SOURce:LOAD
:BODe:DUT:INPut
Command format：

Instruments.uni-trend.com
<amp>
?
10mV
?
<offset>
?
10mV
?
?
{50OHM | HIGH}
.
?
set amplitude 1 of bode diagram to 10 mV.
Query returns 1.000e-003.
Set DC offset of bode diagram source to 10 mV.
Query returns 1.000e-003.
high impedance.
HIGH.
Query returns
MSO/UPO2000 Series
134 / 156