UNI-T MSO/UPO2000 Series Programming Manual page 70

Programming Manual
:PF:TEMPlate
:PF:TEMPlate
Functional description：

This command is used to set or query the horizontal tolerance of template setting of Pass/fail test.
<value>: horizontal tolerance, range is 1~100, the specified range will self-adapting according to the
oscilloscope.
Return format：

Query returns horizontal tolerance of template setting, it is integer data.
For example：

:PF:TEMPlate
:PF:TEMPlate
:PF:TEMPlate
:Y
Command format：

:PF:TEMPlate
:PF:TEMPlate
Functional description：

This command is used to set or query the vertical tolerance of template setting of Pass/fail test.
<value>: vertical tolerance, range is 1~100, the specified range will self-adapting according to the
oscilloscope.
Return format：

Query returns vertical tolerance of template setting, it is integer data.
For example：

:PF:TEMPlate
:PF:TEMPlate
:PF:RESult?
Command format：

:PF:RESult?
Functional description：

This command is used to query the statistical result of Pass/Fail test.
Return data format: <pass>, <failed>, <total>, <pass> represents the number of pass; <failed> represents
the number of fail; <total> present the total number.
Return format：

Query returns the statistical result of Pass/Fail test.
For example：

:PF:RESult?
ACQuire Command
This command is used to set the sampling mode of the oscilloscope.
Instruments.uni-trend.com
:X <value>
?
:X
:X 50
:X?
:Y <value>
?
:Y
:Y 50
:Y?
Set horizontal tolerance of template setting to 50.
Query returns 50.
Set vertical tolerance of template setting to 50.
Query returns 50.
Query returns 35,42,77.
MSO/UPO2000 Series
70 / 156