UNI-T MSO/UPO2000 Series Programming Manual page 69

Programming Manual
:PF:STOP THReshold
:
Command format：

:PF:STOP
:PF:STOP
Functional description：

This command is used to set or query the stop threshold of Pass/fail test.
<value>: stop threshold, range is 1~30000, the specified range will self-adapting according to the
oscilloscope.
Return format：

Query returns stop threshold, it is integer data.
For example：

:PF:STOP
:PF:STOP
:PF:TEMPlate SOURce
:
Command format：

:PF:TEMPlate
:PF:TEMPlate
Functional description：

This command is used to set or query the template source of Pass/fail test.
Physical channel {CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4} can be template source.
If template source set to REF, it can use instruction :PF:TEMPlate:LOAD to load waveform file from REF
as the template source.
If template source set to USB, it can use instruction
U flash dish as the template source.
Return format：

Query returns {CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 | REF | USB}.
For example：

:PF:TEMPlate
:PF:TEMPlate
:PF:TEMPlate:LOAD
Command format：

:PF:TEMPlate:LOAD
Functional description：

This command is used to load the specified waveform file as the template source when the template
source is REF or USB.
For example：

PF:TEMPlate:LOAD
:PF:TEMPlate
:X
Command format：

Instruments.uni-trend.com
THReshold
: <value>
THReshold?
:
THReshold
: 100
THReshold
: ?
SOURce
: {CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4 | REF | USB}
SOURce?
:
SOURce
: CHANnel1
SOURce
: ?
<filename>
"test.dat"
Set the stop threshold of Pass/fail test to 100.
Query returns 100.
:PF:TEMPlate:LOAD
Set template source as channel 1
Query returns CHANnel1
Load test.dat waveform file as the template source
MSO/UPO2000 Series
to load waveform file from
69 / 156