UNI-T MSO/UPO2000 Series Programming Manual page 11

Programming Manual
:SYSTem:COMMunicate:LAN:IPADdress
Command format：

:SYSTem:COMMunicate:LAN:IPADdress <ip>
:SYSTem:COMMunicate:LAN:IPADdress?
Functional description：

This command is used to set IP address. <ip> is belong to the parameter of ASCII character string, the
format is xxx.xxx.xxx.xxx.
Return format：

Query returns IP address.
For example：

:SYST:COMM:LAN:IPAD "192.168.1.10"
:SYST:COMM:LAN:IPAD?
:SYSTem:COMMunicate:LAN:DHCP
Command format：

:SYSTem:COMMunicate:LAN:DHCP {{1 | ON} | {0 | OFF}}
:SYSTem:COMMunicate:LAN:DHCP?
Functional description：

This command is used to switch the configuration mode to automatic IP or manual IP.
Return format：

Query returns dynamic allocation mode, 0 represents manual IP, 1 represents automatic IP.
For example：

:SYST:COMM:LAN:DHCP ON
:SYST:COMM:LAN:DHCP?
:SYSTem:COMMunicate:LAN:MAC?
Command format：

:SYSTem:COMMunicate:LAN:MAC?
Return format：

Query returns MAC physical address.
For example：

:SYST:COMM:LAN:MAC?
:SYSTem:AUTO:CHANnel
Command format：

SYSTem:AUTO:CHANnel
:
SYSTem:AUTO:CHANnel
:
Functional description：

This command is used to set whether the channel keeps the current status when in automatic setting.
AUTO represents that the channel is automatically set by the preset parameter; KEEP represents that the
Instruments.uni-trend.com
Set IP address to 192.168.1.10.
Query returns 192.168.1.10.
Turn on IP dynamic allocation.
Query returns 1.
Query returns 00-2A-A0-AA-E0-56.
{AUTO|KEEP}
?
MSO/UPO2000 Series
11 / 156