UNI-T MSO/UPO2000 Series Programming Manual page 43

Programming Manual
:TRIGger:PULSe:QUALifier {GREaterthan | LESSthan | INRange}
:TRIGger:PULSe:QUALifier?
Functional description：

This command is used to set the setting condition of pulse time, which is GREaterthan (greater than),
LESSthan (less than) and INRange (between).
Return format：

Query returns {GREaterthan | LESSthan | INRange}.
For example：

:TRIGger:PULSe:QUALifier GRE
:TRIGger:PULSe:QUALifier?
:TRIGger:PULSe:POLarity
Command format：

:TRIGger:PULSe:POLarity {POSitive | NEGative}
:TRIGger:PULSe:POLarity?
Functional description：

This command is used to set pulse polarity, which is POSitive and NEGative.
Return format：

Query returns { POSitive | NEGative }.
For example：

:TRIGger:PULSe:POL POS
:TRIGger:PULSe:POL?
:TRIGger:PULSe:TIME
Command format：

:TRIGger:PULSe:TIME
:TRIGger:PULSe:TIME?
Functional description：

This command is used to set time interval of pulse width trigger.
Return format：

Query returns the current time interval, unit is s.
For example：

:TRIGger:PULSe:TIME 1
:TRIGger:PULSe:TIME?
:TRIGger:PULSe:TIME:UPPer
Command format：

:TRIGger:PULSe:TIME
:TRIGger:PULSe:TIME
Functional description：

Instruments.uni-trend.com
Set pulse condition to GREaterthan.
Query returns GREaterthan.
Set pulse polarity to POSitive.
Query returns POSitive.
<time>
Set time interval of pulse width trigger to 1s.
Query returns 1.000e000.
:UPPer
<time>
:UPPer
?
MSO/UPO2000 Series
43 / 156