Record Command - UNI-T MSO/UPO2000 Series Programming Manual

Programming Manual
oscilloscope's suffix name.
The file name of *.bode.csv represents load the bode diagram data of a file into the oscilloscope, it

matched with the oscilloscope's suffix name. And it's only effect to U flash disk.
<source > represents physical channel {CHANnel1 | CHANnel2| CHANnel3| CHANnel4} optional parameter. Only
valid when saving waveform data.
CHANnel1 represents channel 1.

CHANnel2 represents channel 2.

CHANnel3 represents channel 3.

CHANnel4 represents channel 4.

<disk> represents storage medium { FLASH | UDISK }, optional parameter. Omitting represents internal data of
FLASH.
FLASH represents internal data.

UDISK represents U flash disk data.

For example：

FILE:SAVE "test.dat",CHANnel1,UDISK
Save waveform data of channel 1 as test.csv format into U flash disk.
FILE:SAVE "system-set-up01.set"
The configuration data of oscilloscope save as 1 position of internal medium.
FILE:SAVE "wave01.dat",CHANnel1,FLASH
Save waveform data of channel 1 into internal medium.
FILE:SAVE "wave01.dat",CHANnel1
Save waveform data of channel 1 into internal medium.
FILE:SAVE "system-set-up01.set",FLASH
The configuration data of oscilloscope save as internal medium.
FILE:SAVE "system-set-up01.set"
The configuration data of oscilloscope save as 1 position of internal medium.
FILE:SAVE "001.bode.csv",UDISK
Load the bode diagram fata from U flash disk into the oscilloscope.
Notes：When the oscilloscope can not self-defined the file name and suffix
The file name of internal storage setting must be"system-set-up01.set"~ "system-set-up255.set", the

maximum limit is 255 files.
The file name of internal storage bsv file must be"wave01.bsv"~" wave255.bsv", the maximum limit is 255 files.


RECord Command

This command is used to set recording waveform function of the oscilloscope.
:RECord:ENABle
Command format：

:RECord:ENABle { {1|ON} | {0|OFF} }
:RECord:ENABle?
Functional description：

This command is used to turn on/off recording waveform function.
Return format：

Instruments.uni-trend.com
MSO/UPO2000 Series
64 / 156