UNI-T MSO/UPO2000 Series Programming Manual page 118

Programming Manual
AWG:CHANnel<n>:MODulate:WAVe
Command format：

AWG:CHANnel<n>:MODulate:WAVe {SINe|SQUare|UPRamp|DNRamp|ARB|NOISe}
AWG:CHANnel<n>:MODulate:WAVe?
Functional description：

This command is used to set modulating carrier wave type of the specified channel signal, which is sine
wave, square wave, upper-triangle, down-triangle, arbitrary wave and noise wave.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns modulating signal carrier wave type of the specified channel signal.
For example：

AWG:CHANnel1:MODulate:WAVe SINe
Set modulating carrier wave type of channel 1 signal to sine wave.
AWG:CHANnel1:MODulate:WAVe?
AWG:CHANnel<n>:MODulate:FREQuency
Command format：

AWG:CHANnel<n>:MODulate:FREQuency <freq>
AWG:CHANnel<n>:MODulate:FREQuency?
Functional description：

This command is used to set modulating frequency of the specified channel signal.
<freq> represents frequency, unit is Hz.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns modulating frequency of the specified channel signal in scientific notation.
For example：

AWG:CHANnel1:MODulate:FREQuency 2000
Set modulating frequency of channel 1 signal to 2 kHz.
AWG:CHANnel1:MODulate:FREQuency?
AWG:CHANnel<n>:AM:MODulate:DEPTh
Command format：

AWG:CHANnel<n>
AWG:CHANnel<n>
Functional description：

This command is used to set AM modulating depth of the specified channel.
<depth> represents modulating depth, unit is %. 0% ~ 100%，AM modulating depth is 0% ~ 120%.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns modulating depth of the specified channel.
Instruments.uni-trend.com
:AM
:MODulate:DEPTh <depth>
:AM
:MODulate:DEPTh?
Query returns SINe.
Query returns 2e+3.
MSO/UPO2000 Series
118 / 156