Nth Edge Trigger - UNI-T MSO/UPO2000 Series Programming Manual

Programming Manual
:TRIGger:SHOLd:MODE?
:TRIGger:SHOLd:TIME
Command format：

:TRIGger:SHOLd:TIME
:TRIGger:SHOLd:TIME?
Functional description：

This command is used to set time interval of setup hold trigger.
Return format：

Query returns the current time interval, unit is s.
For example：

:TRIGger:SHOLd:TIME 1
:TRIGger:SHOLd:TIME?
:TRIGger:SHOLd:SELect
Command format：

:TRIGger:SHOLd:SELect
:TRIGger:SHOLd:SELect
Functional description：

This command is used to switch the selected source. SOURce<n> represents source, n take value from 1,
2.
SOURce1 represents data source; SOURce2 represents clock source.
Return format：

Query returns { SOURce1 | SOURce2 }.
For example：

:TRIGger:SHOLd:SELect SOURce1
:TRIGger:SHOLd:SELect?

Nth edge Trigger

:TRIGger:NEDGE:SLOPe
Command format：

:TRIGger:NEDGE:SLOPe {POSitive|NEGative}
:TRIGger:NEDGE:SLOPe?
Functional description：

This command is used to set edge type of the trigger, which includes POSitive (rising edge) and NEGative
(falling edge).
Return format：

Instruments.uni-trend.com
Query returns HOLD.
<time>
Set time interval of setup hold trigger to 1s.
Query returns 1.000e000.
<SOURce<n>>
Set the selected focus source.
Query returns SOURce1.
MSO/UPO2000 Series
58 / 156