UNI-T MSO/UPO2000 Series Programming Manual page 60

Programming Manual
Query returns { HIGH | LOW | X | POSitive | NEGative }.
For example：

:TRIGger:PATTern:PATTern HIGH
:TRIGger:PATTern:PATTern?
CURSor Command
This command is uset to set cursor parameter to measure the waveform data on the screen.
:CURSor:MODE
Command format：

:CURSor:MODE { TRACK | INDependent }
:CURSor:MODE?
Functional description：

This command is used to set cursor mode, which includes TRACK and INDependent.
Return format：

Query returns { TRACK | INDependent }.
For example：

:CURSor:MODE TRACK
:CURSor:MODE?
:CURSor:TYPE
Command format：

:CURSor:TYPE
:CURSor:TYPE?
Functional description：

This command is used to set cursor type of cursor mode, which includes AMPlitude, TIME, and CLOSe.
Return format：

Query returns {AMPlitude | TIME | CLOSe }.
For example：

:CURSor:TYPE AMP
:CURSor:TYPE?
:CURSor:SOURce
Command format：

:CURSor:SOURce
:CURSor:SOURce?
Functional description：

This command is used to set cursor source of manual cursor mode.
<source> take value from {CHANnel<n>|MATH}，n take value from 1, 2, 3, 4.
Instruments.uni-trend.com
Set cursor mode to TRACK.
Query returns TRACK.
{AMPlitude | TIME | CLOSe }
Set cursor type to AMPlitude.
Query returns AMPlitude.
<source>
Set patter trigger to 1.
Query returns HIGH.
MSO/UPO2000 Series
60 / 156