UNI-T MSO/UPO2000 Series Programming Manual page 138

Programming Manual
:BODe:SWEep:
Functional description：

This command is used to set cut-off frequency of bode diagram display.
Return format：

Query returns cut-off frequency of bode diagram display, unit is Hz.
For example：

:
:BODe FREQuency:END 1 kHz
Set cut-off frequency of bode diagram display to1 kHz.
:BODe:FREQuency:END?
:BODe:CURSor
Command format：

:BODe:CURSor
:BODe:CURSor
Functional description：

This command is used to turn on/off cursor function of bode diagram.
Return format：

Query returns cursor function status of bode diagram. 0 represents cursor function is not open.1 represents
cursor function is opened.
For example：

:BODe:CURSor
:BODe:CURSor
Query returns 1, it represents cursor function is opened.
:BODe:CURSor:MODE
Command format：

:BODe:CURSor:MODE
:BODe:CURSor:MODE
Functional description：

This command is used to set cursor mode of bode diagram, which is INDependent and TRACking.
Return format：

Query returns cursor mode of bode diagram.
For example：

:BODe:CURSor:MODE
Set cursor mode of bode diagram to TRACking.
:BODe:CURSor:MODE
Explanation of Programming
This chapter is to describe troubleshooting in process of programming. If you meet any of the following
problems, please handle them according to the related instructions.
Instruments.uni-trend.com
END
FREQuency : ?
{{1 | ON} | {0 | OFF}}
?
ON
?
{ INDependent | TRACking }
?
TRACking
? Query returns 1, it represents cursor mode is opened.
Query returns 1.000e003.
Turn on cursor function of bode diagram.
MSO/UPO2000 Series
138 / 156