UNI-T MSO/UPO2000 Series Programming Manual page 74

Programming Manual
Query returns 1, it represents inverse color display is turned on.
:DISPlay:WAVE:BRIGhtness
Command format：

:DISPlay:WAVE:BRIGhtness
:DISPlay:WAVE:BRIGhtness?
Functional description：

This command is used to set waveform brightness, <count> take value from 1~100, larger the number, the
brighter the waveform.
Return format：

Query returns the current waveform brightness.
For example：

:DISPlay:WAVE:BRIGhtness 50
:DISPlay:WAVE:BRIGhtness?
:DISPlay:CLEar
Command format：

:DISPlay:CLEar
Functional description：

This command is used to clear and refresh the waveform on the screen. If there is reference waveform,
then clear and refresh the reference waveform.
:DISPlay:TYPE
Command format：

:DISPlay:TYPE {XY12|XY13|XY14| XY23|XY24|XY34|YT}
:DISPlay:TYPE?
Functional description：

This command is used to set timebase display type to XY12 (X-Y mode: amplitude value of channel 1 display
on the horizontal axis, amplitude value of channel 2 display on the vertical axis; type XY13|XY14|
XY23|XY24|XY34 as above); YT (YT mode: display the relative relation of vertical voltage and horizontal time).
Return format：

Query returns {XY12|XY13|XY14| XY23|XY24|XY34|YT}.
For example：

:DISP:TYPE YT
:DISP:TYPE?
WAVeform Command
This command is used to read the waveform data and relative parameter on the screen of the oscilloscope.
:WAVeform:MODE
Command format：

Instruments.uni-trend.com
<count>
Set waveform brightness to 50.
Query returns 50.
Set timebase format to YT mode.
Query returns YT.
MSO/UPO2000 Series
74 / 156