Table of Contents
Advertisement
Programming Manual
:SBUS:FR:DATA:OFFSet:CTL
Command format：
:FR
:SBUS
:FR
:SBUS
Functional description：
This command is used to set FlexRay bus DATA byte offset status of the oscilloscope.
Return format：
Query returns 1 or 0, it repectively represents ON or OFF.
For example：
:FR
:SBUS
Turn on FlexRay bus DATA byte offset.
:FR
:SBUS
:SBUS:FR:DATA:OFFSet
Command format：
:FR
:SBUS
:FR
:SBUS
Functional description：
This command is used to set FlexRay bus DATA byte offset of the oscilloscope. Byte offset is turned on by
default when using this instruction.
<offset>: byte offset, it is integer data type and the range is 0~253.
Return format：
Query returns byte offset.
For example：
:FR
:SBUS
Set FlexRay bus DATA byte offset to 8.
:FR
:SBUS
:SBUS:FR:END:TYPE
Command format：
:FR:END
:SBUS
:FR:END
:SBUS
Functional description：
This command is used to set FlexRay bus trigger condition end frame type of the oscilloscope.
{ STATIC | DTS | ALL}: static, dynamic, full.
Return format：
Query returns { STATIC | DTS | ALL}.
For example：
:FR:END
:SBUS
Set FlexRay bus trigger condition to static end frame.
Instruments.uni-trend.com
:OFFSet:CTL
:DATA
{ {1|ON} | {0|OFF} }
:OFFSet:CTL
:DATA
?
:OFFSet:CTL
:DATA
ON
:OFFSet:CTL
:DATA
?
:OFFSet
:DATA
<offset>
:OFFSet
:DATA
?
:OFFSet
:DATA
8
:OFFSet
:DATA
?
:TYPE { STATIC | DTS | ALL}
:TYPE?
:TYPE STATIC
Query returns 1.
Query returns 8.
MSO/UPO2000 Series
109 / 156
Advertisement
Table of Contents
