Setup Hold Trigger - UNI-T MSO/UPO2000 Series Programming Manual

Programming Manual
:TRIGger:DURation:TIME:LOWer?
:TRIGger:DURation:TIME:UPPer
Command format：

:TRIGger:DURation:TIME:UPPer <time>
:TRIGger:DURation:TIME:UPPer?
Functional description：

This command is used to set the upper time limit of duration trigger. It can be set when time interval
condition is LESSthan (less than).
Return format：

Query returns the current upper time limit, unit is s.
For example：

:TRIGger:DURation:TIME:UPPer 1
:TRIGger:DURation:TIME:UPPer?

Setup Hold Trigger

:TRIGger:SHOLd:DATA:SOURce
Command format：

:TRIGger:SHOLd:DATA:SOURce {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}
:TRIGger:SHOLd:DATA:SOURce?
Functional description：

This command is used to set data source of setup hold trigger.
Return format：

Query returns {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}.
For example：

:TRIGger:SHOLd:DATA:SOUR CHAN1
:TRIGger:SHOLd:DATA:SOUR?
:TRIGger:SHOLd:CLOCK:SOURce
Command format：

:TRIGger:SHOLd:CLOCK:SOURce {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}
:TRIGger:SHOLd:CLOCK:SOURce?
Functional description：

This command is used to set clock source of setup hold trigger.
Return format：

Query returns {CHANnel1 | CHANnel2| CHANnel3| CHANnel4}.
For example：

Instruments.uni-trend.com
Query returns 1.000e000.
Set the upper time limit of duration trigger to 1s.
Query returns 1.000e000.
Set channel 1 as data source.
Query returns CHANnel1.
MSO/UPO2000 Series
56 / 156