UNI-T MSO/UPO2000 Series Programming Manual page 131

Programming Manual
:LA:BUS1:NRTime
:LA:BUS<n>:SOURce
Command format：

:LA:BUS<n>:SOURce
:LA:BUS<n>:SOURce
Functional description：

This command is used to set the currently selected channel source of LA bus parallel decoding of the
oscilloscope.
<n>: integer data {1|2}, it respectively represents bus 1~2.
<digital>: it represents {D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}.
Return format：

Query returns the currently selected channel source.
For example：

:LA:BUS1:SOURce
LA bus 1 channel source selects D0, D3 and channe 1.
:LA:BUS1:SOURce
Command
BODe
This command is used to set bode diagram function. It is only valid if the oscilloscope has this instruction.
:BODe:APPLy
Command format：

BODe:APPLy
:
BODe:APPLy
:
Functional description：

This command is used to turn on/off bode diagram of the oscilloscope.
Return format：

Query returns lock status of full keyboard. 0 represents the full keyboard is not open, 1 represents the full
keyboard is opened.
For example：

:BODe:APPLy ON
:BODe:APPLy?
Query returns 1, it represets the full keyboard is opened.
:BODe:EVENt
Command format：

BODe:EVENt
:
BODe:EVENt
:
Functional description：

This command is used to turn on/off bode diagram event list of the oscilloscope.
Instruments.uni-trend.com
? Query returns 5.000e-005.
<digital0>[, digital1~ digital15, CHANnel1, CHANnel2]
?
D0,D3,CHANnel1
?
{{1 | ON} | {0 | OFF}}
?
{{1 | ON} | {0 | OFF}}
?
Query returns D0,D3,CHANnel1.
Turn on bode diagram.
MSO/UPO2000 Series
131 / 156