UNI-T MSO/UPO2000 Series Programming Manual page 113

Programming Manual
For example：

AWG:CHANnel1:MODe BASE
Set channel 1 signal output in fundamental wave mode.
AWG:CHANnel1:MODe?
AWG:CHANnel<n>:BASE:WAVe
Command format：

AWG:CHANnel<n>:BASE:WAVe { SINe | SQUare | PULSe | RAMP | ARB | NOISe | DC }
AWG:CHANnel<n>:BASE:WAVe?
Functional description：

This command is used to set the fundamental wave type of the specified channel, which is sinewave,
square wave, pulse wave, triangle wave, arbritary wave, noise wave and DC.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns the fundamental wave type of the specified channel.
For example：

AWG:CHANnel1:BASE:WAVe SINe
Set the fundamental wave type of channel 1 to sibe wave.
AWG:CHANnel1:BASE:WAVe?
AWG:CHANnel<n>:BASE:FREQuency
Command format：

AWG:CHANnel<n>:BASE:FREQuency <freq>
AWG:CHANnel<n>:BASE:FREQuency?
Functional description：

This command is used to set output frequency of the specified channel.
<freq> represents frequency value, unit is Hz. (1e-6s ~ the currently maximum allowed frequency)
<n>: channel number, n take value from 1, 2.
Return format：

Query returns output frequency of the specified channel in scientific notation.
For example：

AWG:CHANnel1:BASE:FREQuency 2000
Set output frequency of channel 1 to 2 kHz.
AWG:CHANnel1:BASE:FREQuency?
AWG:CHANnel<n>:BASE:AMPLitude
Command format：

AWG:CHANnel<n>:BASE:AMPLitude <amp>
AWG:CHANnel<n>:BASE:AMPLitude?
Functional description：

Instruments.uni-trend.com
Query returns BASE.
Query returns SINe.
Query returns 2e+3.
MSO/UPO2000 Series
113 / 156