UNI-T MSO/UPO2000 Series Programming Manual page 57

Programming Manual
:TRIGger:SHOLd:CLOCK:SOUR CHAN1
:TRIGger:SHOLd:CLOCK:SOUR?
:TRIGger:SHOLd:SLOPe
Command format：

:TRIGger:SHOLd:SLOPe {POSitive|NEGative}
:TRIGger:SHOLd:SLOPe?
Functional description：

This command is used to set edge type of setup hold trigger, which includes POSitive (rising edge) and
NEGative (falling edge).
Return format：

Query returns {POSitive|NEGative}.
For example：

:TRIGger:SHOLd:SLOPe POS
:TRIGger:SHOLd:SLOPe?
:TRIGger:SHOLd:PATTern
Command format：

:TRIGger:SHOLd:PATTern { HIGH | LOW }
:TRIGger:SHOLd:PATTern?
Functional description：

This command is used to set pattern of setup hold trigger, which includes HIGH (pattern value is 1) and LOW
(pattern value is 0).
Return format：

Query returns { HIGH | LOW }.
For example：

:TRIGger:SHOLd:PATTern HIGH
:TRIGger:SHOLd:PATTern?
:TRIGger:SHOLd:MODE
Command format：

:TRIGger:SHOLd:MODE
:TRIGger:SHOLd:MODE?
Functional description：

This command is used to set time mode of setup hold trigger, which includes SETup (setup time) , HOLD
(hold time) and SH (setup hold time).
Return format：

Query returns { SETup | HOLD | SH }.
For example：

:TRIGger:SHOLd:MODE HOLD
Instruments.uni-trend.com
Set channel 1 as clock source.
Query returns CHANnel1.
Set setup hold trigger to POSitive.
Query returns POSitive.
Set pattern of setup hold trigger to 1.
Query returns HIGH.
{ SETup | HOLD | SH }
Set time mode of setup hold trigger to HOLD.
MSO/UPO2000 Series
57 / 156