Downloading The Project To The Quantum Processor - ProSoft Technology ProTalk PTQ-PDPMV1 User Manual

Configuring the Processor with Unity Pro
User Manual
3 As the project is built, Unity Pro reports its process in a Progress dialog box,
with details appearing in a pane at the bottom of the window. If you are using
the sample project, the project should build without errors. The following
illustration shows the build process under way.

3.1.5 Downloading the Project to the Quantum Processor

1 Open the PLC menu and then choose C
connection between the Unity Pro software and the processor, using the
address and media type settings you configured in the previous step.
2 On the PLC menu, choose T
the T
RANSFER
RUN mode immediately after the transfer is complete, select (check) the PLC
R
UN AFTER
Page 74 of 306
RANSFER
P PLC dialog box. If you would like the PLC to go to
ROJECT TO
T check box.
RANSFER
PROFIBUS DP Master Network Interface Module for Quantum
. This action opens a
ONNECT
P PLC. This action opens
ROJECT TO
PTQ-PDPMV1 ♦ Quantum Platform
ProSoft Technology, Inc.
August 12, 2014