ProSoft Technology ProTalk PTQ-PDPMV1 User Manual page 238

Diagnostics and Troubleshooting
User Manual
Viewing Ethernet NIC Configuration
Press [4] to view the configuration for the Ethernet Network Interface Card (NIC)
in the module.
Viewing the WATTCP.CFG File
Press [@] from the Network menu. Use this command to view the module's IP
address settings.
Exiting the Program
Press [ESC] to restart the module and force all drivers to be loaded. The module
will use the configuration stored in the module's flash memory to configure the
module.
8.6.4 Input Data View Menu
Use this menu command to view the current contents of the selected database.
Press [?] to view a list of commands available on this menu.
Viewing the Previous Page of Data
Press [P] to display the previous page of data.
Viewing the Next Page of Data
Press [N] to display the next page of data.
Page 238 of 306
PROFIBUS DP Master Network Interface Module for Quantum
PTQ-PDPMV1 ♦ Quantum Platform
ProSoft Technology, Inc.
August 12, 2014