ProSoft Technology ProTalk PTQ-PDPMV1 User Manual page 267

PTQ-PDPMV1 ♦ Quantum Platform
PROFIBUS DP Master Network Interface Module for Quantum
9.3.5 Quick Start
The following steps demonstrate how to start the FDT (Field Device Tool)
program and configure the PROFIBUS comDTM.
Starting FDT
1 Start the FDT program and login as administrator. The following procedures
use PACTware 3.0 software.
2 Click the U
installed successfully, it will appear in the Device Catalog window.
3 Select the P
then click A
Repeat steps 1 through 3 to add any other manufacturer's device DTMs
4
installed on your computer. Select the correct address for each device, and
then click OK to proceed.
Note: You must use the same PROFIBUS device address that you used when setting up the
device.
ProSoft Technology, Inc.
August 12, 2014
PDATE DEVICE CATALOG
S T
RO OFT ECHNOLOGY COM
.
DD
button. If PROFIBUS comDTM was
DTM entry in the device catalog, and
Reference
User Manual
Page 267 of 306