Dty File; Txt File - ProSoft Technology ProTalk PTQ-PDPMV1 User Manual

Configuring the Processor with Concept 2.6
User Manual

4.4.2 -.DTY file

This file contains the data type definitions that will be required for the Concept
project. The default DTY file name will be the same as the PTQ module name in
the PCB configuration.
Note: If your application requires multiple PTQ-PDPMV1 modules for the same project, you must
merge the .DTY files. Refer to Using Multiple PTQ-PDPMV1 Modules with Concept (page 291) for
instructions.

4.4.3 -.TXT file

This file contains the variables that will be imported to Concept. The default TXT
file name will be the same as the PTQ module name in the PCB configuration.
Page 108 of 306
PROFIBUS DP Master Network Interface Module for Quantum
PTQ-PDPMV1 ♦ Quantum Platform
ProSoft Technology, Inc.
August 12, 2014