Table of Contents
Advertisement
ENVIRONMENT
Menu
RETURN
Graphic Display Output for HA Nodes
36
To use the ACTIVITY menu in the graphic display:
1.
From the top menu of the graphic display, press the Enter button.
2.
Press the Up or Down button to scroll to the ACTIVITY selection.
3.
Press the Enter button. The first screen in the ACTIVITY menu is displayed.
4.
Press the Up or Down button to scroll through the three ACTIVITY screens. You
can press the Enter button on any of the screen to update the display with the
most recent statistics.
5.
Press the Up or Down button to scroll to the RETURN selection.
6.
Press the Enter button to return to the Top Menu.
The ENVIRONMENT menu allows you to view information about the hardware's
operational status. The graphic display presents the following information in the
order listed:
•
Screen 1 — Hardware alarms and Link Alarms:
HW ALARM : 0
LINK ALARM : 2
•
Screen 2 — System temperature and fan speeds:
TEMPERATURE: 38.00 C
FAN SPEEDS:
100% 100% 100% 100%
•
Screen 3 — System voltages:
VOLTAGES (V):
1.099, 1.186
1.488, 1.790
2.458, 3.278, 4.982
To use the ENVIRONMENT menu in the graphic display:
1.
From the top menu of the graphic display, press the Enter button.
2.
Press the Up or Down buttons to scroll to the ENVIRONMENT selection.
3.
Press the Enter button. The ENVIRONMENT information is displayed.
4.
Press the Up or Down button to scroll to the RETURN selection.
5.
Press the Enter button to return to the Top Menu.
Pressing the Enter button for the RETURN selection returns you to the base display
during normal operating conditions or to the alarm display during an alarm
condition.
The information included in this section only applies to high availability Acme
Packet 4600 System nodes.
Acme Packet 4600 Hardware Installation and Maintenance Guide
Advertisement
Table of Contents
