Transmission - Bell B40C 6X6 Operator's Manual

Articulated dump truck
Table of Contents

Advertisement

Check the Air Cleaner Assembly
4
3
1. Check the air cleaner assembly for damage to
the air cleaner (1) and pre-cleaner (2).
2. Check the rubber elbow (3), connecting pipes,
clamps and mounting bolts for security and
damage.
3. Check that the service indicator (4) is not show-
ing a red flag, re-set if necessary.
Check the Air Cleaner Pre-cleaner Bowl
1
1. Check the level of the dirt in the bowl, if it
reaches the level (1) marked on the bowl, the
bowl must be cleaned.
870984-01
June 1, 1999
2
1
F002012
F000842

Transmission

Check the Transmission Dipstick
1. Every time that the transmission dipstick is re-
moved, check that the seal (1) is secure and not
damaged.
2. Check that the handle (2) tightens and seals the
dipstick in position.
Check the Transmission Fluid Level
Always check the fluid level at least twice. If the read-
ings are not consistent, check and clean the
transmission breather.
There are three methods for checking the transmis-
sion fluid level, they are as follows:
• The dipstick check when the transmission fluid
is cold.
• The dipstick check when the transmission fluid
is hot.
• A fluid level check using the push-button shift
selector.
2
1
F000875
63

Advertisement

Table of Contents
loading

Table of Contents