Bell B40C 6X6 Operator's Manual page 46

Articulated dump truck
Table of Contents

Advertisement

Emergency Steering Warning Indicator
n/min
The emergency steering warning indicator (1) is lo-
cated on the main instrument panel.
The indicator will illuminate when there is an engine
failure and the emergency steering is activated.
Note: The emergency steering system must only be
used to steer the machine to safety.
‹ WARNING
When the indicator illuminates the machine must
be steered to safety as soon a possible and then
stopped.
Do Not Shift Warning Indicator
The do not shift warning indicator (1) is located on
the main instrument panel.
The indicator will illuminate when there is serious
transmission failure.
Note: When the indicator illuminates the machine
must be stopped immediately using only the service
brakes and not the gear shift control.
‹ CAUTION
When the indicator illuminates the machine must
be stopped immediately, without using the gear
shift control as serious damage to the transmis-
sion may result.
16
1
S005056
1
!
S005065
Bin Up Warning Indicator
The bin up warning indicator is located on the main
instrument panel.
The indicator will illuminate when the bin is raised.
‹ WARNING
As a safety precaution it is recommended that
the operator should not drive the machine when
the bin up indicator is illuminated as this may
cause serious damage to the machine and/or in-
jury to personnel. Refer to Tip Control Lever in
this Chapter for special instructions regarding
driving the machine while the bin is raised.
Cold Start Warning Indicator
The cold start warning indicator is located in the right
instrument panel.
Note: The cold start function on the machine is auto-
matic when the outside temperature is below 15
o
(59
F)
When the outside temperature is below 15
and the master switch is moved to the ON (I) position
the cold start indicator will illuminate.
‹ CAUTION
Do not start the engine until the cold start indica-
tor goes off. Starting the engine when the
temperature is below 15
ous damage to the engine.
When the cold start indicator goes off the machine
can be started.
1
P
S005061
S005044
o
C (59
o
o
C (59
F) will cause seri-
870984-01
June 1, 1999
o
C
o
F)

Advertisement

Table of Contents
loading

Table of Contents