Transmission
Change the Transmission Fluid and
Filters
Procedure described in
Hours Service.
Change the Transfer Case Oil
Procedure described in
Hours Service.
Hydraulics
Change the Return Filters
Procedure described in
Hours Service.
Pneumatic System
Change the Air Drier Filter (Unloader
Valve)
1. Drain the air reservoir to release the air pressure
in the system
2. Open the transmission cooler box lid to gain ac-
cess to the air drier filter.
3. Unscrew and remove the filter cartridge (1). Dis-
card the filter and O-ring, do not re-use.
92
Chapter 10, First 100
Chapter 10, First 100
Chapter 10, First 100
F000999
4. Fit a new filter cartridge to the filter head with a
new O-ring. Smear a little oil on the new O-ring
before fitting
5. Tighten the air drier filter cartridge by hand and
then one half turn further.
6. Start the engine and when the air pressure has
reached normal operating pressure, check for
air leaks at the filter head.
Axles, Chassis and Driveshafts
Check the Bin Pivot Pins
Procedure described in
Hours Service.
Chapter 10, First 100
870984-01
June 1, 1999