Table of Contents
Advertisement
Symptom
Wheel misalignment
Wheel cracked
Symptom
Tyres wearing in tread centre
Tyres wearing on both sides of the
tread
Tyres loosing pressure
Cracks, splits or bulges in the tyre
sidewall
Uneven tyre wear
Deterioration of the tyre material
Rapid tyre wear
Tyre component heat separation
Tyre rubbing on the frame
Cracks in the tyre tread grooves
116
Wheel Trouble Shooting
Possible Cause
Wheel bent or damaged
Impact damage
Overloading
Tyre Trouble Shooting
Possible Cause
Tyres over-inflated
Tyres under inflated
Tyre punctured
Inflation valve defective
Impact damage
Defective tyre
Tyre over inflated
Tyre under inflated
Incorrect alignment
Fuel or oil contamination
Excessive speed
Poor road surface conditions
Excessive speed
Wheel mis-aligned on the axle
Incorrect tyre pressure
Remedy
Change the wheel
Change the wheel
Change the wheel
Remedy
Reduce the tyre pressure to the cor-
rect level
Increase the tyre pressure to the
correct level
Repair the puncture or change the
tyre
Change the inflation valve
Change the tyre
Change the tyre
Change the tyre
Change the tyre
Check and adjust the alignment.
Contact your BELL Product Support
Representative
Locate the source of contamination.
Change the tyre
Instruct the operator on proper driv-
ing. Change the tyre
Recommend road surface mainte-
nance. Change the tyre
Instruct the operator on proper driv-
ing. Change the tyre
Inspect the tyre and change if nec-
essary. Check and adjust the wheel
and axle alignment
Chance the tyre if separation occurs.
June 1, 1999
870984-01
Advertisement
Table of Contents
