Table of Contents
Advertisement
Controls and Instruments
Gauges
Hour Meter (SMR Meter)
Hobbs
QUARTZ
0
0
0
0
0
HOURS
The hour meter (SMR) is located on the right side in-
strument panel.
The gauge displays the service meter readings
(SMR) for the machine service life.
The gauge is used to determine the service intervals
for the machine.
Air Pressure Gauge
4
3
2
1
0
X100
S005043
The air pressure gauge is located on the right side in-
strument panel.
870984-01
June 1, 1999
I
1
10
S005042
5
6
7
8
Dia 61
9
10
kPa
The gauge measures the pneumatic system pres-
sure.
System pressure is 930 kPa (134 psi).
Note: The accelerator pedal is not operational until
the air pressure has reached normal operating pres-
sure 930 kPa (134 psi).
The red needle indicates the pressure in the front
pneumatic circuit.
The white needle indicates the pressure in the rear
pneumatic circuit.
‹ WARNING
Never operate the machine with the air pressure
below 500 kPa (73 psi). This may cause brake
failure which may result in machine damage,
personal injury and/or death.
Transmission Oil Temperature Gauge
Cels.
80 100 120
Dia 53
50
The transmission oil temperature gauge is located
on the main instrument panel .
The gauge measures the temperature of the trans-
mission oil in degrees Celsius (
The normal operating temperature is between 71
o
o
and 93
C (176
F to 230
If overheating occurs stop the machine, engage neu-
tral and allow the engine to run at 1 500 rpm until the
transmission temperature returns to normal.
‹ CAUTION
The maximum operating temperature is 145
o
(293
F). The machine must not be operated at
this temperature for more than one minute,
longer periods may cause serious damage to the
transmission.
150
S005048
o
C).
o
F)
o
C
o
C
11
Advertisement
Table of Contents
