Operation Via Pc; General Usage Notes; Start And Design Of The User Interface; Initial Start Of The Operation - Siemens SICAM 7KG85X Manual

9.11

Operation via PC

General Usage Notes

9.11.1
The device can be operated with HTML pages via the connected PC. Additionally, limited operation of the
device is possible with softkeys on the display side in connection with the display.
The graphical user interface is stored in the device. To display the user interface, start the Web browser and
enter the IP address of the device.
You can navigate via the Web browser using the icons on the toolbar, for example back, forward, print. The
user interface itself does not contain any navigation icons.
Operating actions are performed with the mouse. Parameters and text are entered using the keyboard.
Table 9-5
Control Element
NOTE
i
i
At the beginning of the parameterization, first set the Network type according to chapter
tion via Web Pages. If you change the Network type during operation, check all settings, measured values,
and limiting values for inconsistencies after activating the device. Check also the ICD/IID file which is suit-
able for the network type. If there are invalid values or a wrong ICD/IID file, restart the device.
NOTE
i
i
If you change settings in tabs, click Send on each tab to confirm the new setting. The settings have to be
activated after the entire parameterization has been completed.
9.11.2

Start and Design of the User Interface

9.11.2.1

Initial Start of the Operation

Before starting the user interface, the following preconditions must be met:
•
Assemble the device as described in chapter
•
Connect the lines for measurement, communication, and supply voltage as described in the chapters
9.5 Electrical
•
Observe the safety notes.
•
Switch on the devices needed for the measurement.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
Control Functions
Connection, 9.7 Communication
Control Function
Option button: selects one option
List box: selects an item from a list
Button: Executing an action by clicking the button, that is the
current settings on the Web page are transmitted to the device.
Active tab (light blue)
Inactive tab (dark blue)
Selects and opens the item to be activated, for example a tab
9.3 Assembly.
Connections, and 9.8 Binary
Commissioning and First Steps
9.11 Operation via PC
2.5.1 Configura-
Connections.
215