Remote Operation Via Profibus Pa; Simatic Pdm; Device Description - Siemens Sitrans Probe LU Instruction Manual

Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual

Remote operation via PROFIBUS PA

SITRANS Probe LU (PROFIBUS PA) is a Class B, Profile Version 3.0, rev. 1, PA device. It
supports Class 1 Master for cyclic and acyclic data exchange, and Class 2 for acyclic
services. The full range of SITRANS Probe LU functions is available only over a
PROFIBUS PA network.
PROFIBUS PA is an open industrial protocol. Full details about PROFIBUS PA can be
obtained from PROFIBUS International at www.profibus.com.
To use PROFIBUS PA, you will need a PC configuration tool: we recommend
SIMATIC PDM. Please consult the operating instructions or online help for details on
using SIMATIC PDM. (You can find more information at www.fielddevices.com: go to
Products and Solutions > Products and Systems > Process Device Manager.)
SIM ATIC PDM
SIMATIC PDM is a software package used to design, parameterize, commission,
diagnose and maintain SITRANS Probe LU and other process devices.
SIMATIC PDM contains a simple process monitor of the process values, alarms, and
status signals of the device. SIMATIC PDM allows you to manage process device data in
the following ways:
• display
• set
• change
• compare
• check the plausibility
• manage
• simulate

Device Description

In order to use
Device Description for SITRANS Probe LU, which will be included with new versions of
PDM. When you set up a new device, you can locate the Device Description in
, under
under Siemens Milltronics, you can download it from the product page of our
web site at:
https://pia.khe.siemens.com/index.asp?Nr=11157 under
Page 22 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
Doc Id: VM11
Active Date: 15/12/2006
with PROFIBUS PA, you will need the
. If you do not see
.
7ML19985JB02