Agilent Technologies 1670G Series Service Manual page 46

Testing Performance
To test the single-clock, single-edge, state acquisition (logic analyzer)
Configure the trigger according to the connected channels.
4
a Press the Trigger key.
b Select the field next to "a" under the label Bus1. Type the following for your logic
analyzer, then press the Select key.
Agilent 1670G – "AA"
Agilent 1672G – "AA"
Agilent 1671G – "2A"
Agilent 1673G – "0A"
Enable the pulse generator channel 1, channel 2, and trigger outputs (with the LEDs
5 5
off).
3–22