Agilent Technologies 1670G Series Service Manual page 30

Testing Performance
To perform the self-tests
Select Exit to exit the Board Verification. In the Analy PV menu, select Acquisition
10
IC Verification. In the Acquisition IC Verification menu, select All Tests.
When the tests finish, the status for each test shows PASSED or FAILED, and the status for
the All Tests changes from UNTESTED to TESTED.
Record the results of the tests on the performance test record at the end of this
11
chapter.
If you have an oscilloscope, go to step 14. If you have a pattern generator, go to step
12
17. Otherwise, go to step 18.
If you do not have an Agilent 1670G-series logic analyzer with the oscilloscope
13
option or pattern generator option, exit the tests by pressing the System key. Select
the field to the right of the Sys PV field. Select the Exit Test System.
If you have the oscilloscope, Select Analy PV, then select Scope PV in the pop-up
14
menu. In the Scope PV menu, select Functional Tests then select ALL Tests.
You can run all tests at one time, except for the Data Input Inspection, by running All Tests.
To see more details about each test when troubleshooting failures, you can run each test
individually.
Record the results of the tests on the performance test record at the end of this
15
chapter.
To exit the test system, press the System key, then press the Select key. Select Exit
16
Test, then select Exit Test System.
If you have the pattern generator option, Select Analy PV, then select PattGen in the
17
pop-up menu. In the PattGen menu select All Tests.
You can run all tests at one time (except the Output Patterns routine) by selecting All Tests.
To see more details about each test, you can run each test individually. This example shows
how to run all tests at once.
When the tests finish, the status for each test shows Passed or Failed.
Exit the test system.
18
a. Select Analy PV, Scope PV, or PattGen depending on what was last tested.
b. Select Sys PV.
c. Select System Test, then select Exit Test.
d. Select Exit Test System to reload the operating system.
3–6