Agilent Technologies 1670G Series Service Manual page 224

Product Warranty
This Agilent Technologies product
has a warranty against defects in
material and workmanship for a
period of one year from date of
shipment. During the warranty
period, Agilent Technologies will,
at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair, this
product must be returned to a
service facility designated by
Agilent Technologies.
For products returned to Agilent
Technologies for warranty service,
the Buyer shall prepay shipping
charges to Agilent Technologies
and Agilent Technologies shall pay
shipping charges to return the
product to the Buyer. However,
the Buyer shall pay all shipping
charges, duties, and taxes for
products returned to Agilent
Technologies from another
country.
Agilent Technologies warrants that
its software and firmware
designated by Agilent
Technologies for use with an
instrument will execute its
programming instructions when
properly installed on that
instrument. Agilent Technologies
does not warrant that the
operation of the instrument
software, or firmware will be
uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate
maintenance by the Buyer,
Buyer-supplied software or
interfacing, unauthorized
modification or misuse, operation
outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is
expressed or implied. Agilent
Technologies specifically
disclaims the implied
warranties of merchantability
or fitness for a particular
purpose.
Exclusive Remedies
The remedies provided herein are
the buyer's sole and exclusive
remedies. Agilent Technologies
shall not be liable for any direct,
indirect, special, incidental, or
consequential damages, whether
based on contract, tort, or any
other legal theory.
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for
Agilent Technologies products.
For any assistance, contact your
nearest Agilent Technologies Sales
Office.
Certification
Agilent Technologies certifies that
this product met its published
specifications at the time of
shipment from the factory. Agilent
Technologies further certifies that
its calibration measurements are
traceable to the United States
National Institute of Standards and
Technology, to the extent allowed
by the Institute's calibration
facility, and to the calibration
facilities of other International
Standards Organization members.
About this edition
This is the first edition of the
Agilent 1670G-Series Logic
Analyzers Service Guide.
Publication number:
01670-97023, November 2003
Edition dates are as follows:
01670-97019, November 2001
01670-97018, September 2001
01670-97015, January 2000
01670-97009, December 1999
New editions are complete
revisions of the manual. A software
or firmware code may be printed
before the date. This code
indicates the version level of the
software or firmware of this
product at the time the manual or
update was issued. Many product
updates do not require manual
changes; and, conversely, manual
corrections may be done without
accompanying product changes.
Therefore, do not expect a
one-to-one correspondence
between product updates and
manual updates.