Agilent Technologies 1670G Series Service Manual page 144

Troubleshooting
To run the self-tests
Select one of the Scope PV tests.
17
You can run all of the tests at one time by selecting All Tests, or you can run each test
individually. For this example, select Data Memory Test.
In the Data Memory Test menu, select Run, then select Single. The test runs one
18
time, then the screen shows the results. When the test is finished, select Done.
To run a test continuously, select Repetitive. Select Stop to halt a Repetitive Run.
Go to step 19 to exit the test system.
5–18