Agilent Technologies 1670G Series Service Manual page 145

For the pattern generator, Select Analy PV, then select Patt Gen in the pop-up menu.
19
In the Patt Gen menu select Clock Source Test.
You can run all tests at one time (except the Output Patterns routine) by selecting All Tests.
To see more details about each test, you can run each test individually. This example shows
how to run the Clock Source Test. The Vector Memory Test, Address Counter Test, and
Instruction Tests are run in a similar manner.
When the tests finish, the status for each test shows Passed or Failed. Select Done.
To exit the tests, press the System key. Select the field to the right of the Sys PV
20
field.
Select the Exit Test System.
21
If you are performing the self-tests as part of the troubleshooting flowchart, return to the
flowchart.
Troubleshooting
To run the self-tests
5–19