Panasonic FP7 Series Command Reference Manual page 49

■
Ethernet Communication (SMTP Mail Sending) Instruction
Operatio
Name
Mail Text
−
Setting
Mail Text Read −
Mail Server
−
Setting
Destination
−
Group Setting
Mail
Transmission −
Setting
Logging/Trace
−
mail setting
Mail Send
−
Request
Mail
Transmission −
Control
(Note 1) Can be used with CPU units CPS4RE*/CPS3RE*.
■
Ethernet Communication (Ethernet/IP) Instruction
Operatio
Name
Information
acquisition of −
EtherNet/IP
EtherNet/IP
node status
−
acquisition
instruction
Cyclic
communication −
start request
Cyclic
communication −
stop request
WUME-FP7CPUPGR-12
n
Mnemonic
Unit
SMTPcB
(P)
DY
SMTPcB
(P)
RD
SMTPcS
(P)
V
SMTPcA
(P)
DD
SMTPcS
(P)
ET
SMTPcL
(P)
OG
SMTPcR
(P)
EQ
SMTPcC
(P)
TL
n
Mnemonic
Unit
ETSTAT (P)
EIPNDST
EIPSTART
EIPSTOP
1.2 List of High-level Instructions
Operand Function overview
Sets the text specified by [S2] into the mail
S1, S2
text of the number specified by [S1].
Reads the mail text of the number specified
S, D
by [S] to the area specified by [D].
Sets the mail transmission server and the
S1, S2, sender to the CPU unit according to the
S3 parameters specified by [S1], [S2], and
[S3].
Sets the destination group name specified
S1, S2,
by [S2] and the destination address
specified by [S3] and [S4] to the destination
S3, S4
group number specified by [S1].
Stores the mail transmission settings of
S1, S2,
[S1] to [S4] in the mail transmission setting
S3, S4
area.
Stores the logging/trace mail settings of
S1, S2,
[S2] to [S4] in the logging/trace transfer
S3, S4
setting area specified by [S1].
Requests transmission of the mail with the
S
transmission No. specified by [S].
Controls whether to enable, disable, or
cancel the transmission of mail, according
S1, S2
to the specification of the control
description [S2] for control target [S1].
Operand Function overview
Reads the parameter information or status
S1, S2,
information specified by [S1] and [S2], and
D
stores it in the area starting with [D].
Stores the status for the node number
S, D1, specified by [S] in the device specified by
D2 [D1], and stores the execution result in
[D2].
Starts the node on which the start request
is made within the maximum node number
S, n, D
specified by [n] from the stop request node
number table specified by [S].
Stops the node on which the stop request
is made within the maximum node number
S, n, D
specified by [n] from the stop request node
number table specified by [S].
Page
"P.17-102"
(Note 1)
"P.17-105"
(Note 1)
"P.17-108"
(Note 1)
"P.17-115"
(Note 1)
"P.17-120"
(Note 1)
"P.17-130"
(Note 1)
"P.17-135"
(Note 1)
"P.17-139"
(Note 1)
Page
"P.17-142"
(Note 1)
"P.17-148"
(Note 1)
"P.17-180"
(Note 1)
"P.17-183"
(Note 1)
1-31