Panasonic FP7 Series Command Reference Manual page 44

1.2 List of High-level Instructions
Operatio
n
Name
Unit
String Addition −
Obtainment of
−
String Length
String Search −
Takeout of the
Right Side of a
−
String
Takeout of the
Left Side of a
−
String
Data Read
from a Given
−
Position in the
String
Rewrite from a
Given Position −
in the String
Replacement
of a Character −
String
■
Communication Instructions
Operatio
n
Name
Unit
Specify
communication −
unit slot port
General-
Purpose
Communicatio US, SS
n Send
Instruction
General-
Purpose US, SS
Communicatio
1-26
Mnemonic Operand Function overview
S1, S2,
ESADD (P)
D
ELEN (P) S, D
S1, S2,
ESSRC (P)
D
S1, S2,
ERIGHT (P)
D
S1, S2,
ELEFT (P)
D
S1, S2,
EMIDR (P)
S3, D
S1, S2,
EMIDW (P)
D, n
ESREP (P) S, D, p, n
Mnemonic Operand Function overview
UNITSEL (P) S1, S2
GPTRNS (P) S, n, D
pGPSEND S, n, D
Couples the character string of [S1] with
the character string of [S2], and stores it in
[D].
The number of characters stored in the
character string table data starting with [S]
is stored in [D].
Searches for data [S1] from the character
string table data starting with [S2], and the
relative position of the first match is stored
in [D].
Retrieves the number of characters [S2]
from the right side (the side where the
device address is larger) of the character
string table starting with [S1], and stores it
in [D].
Retrieves the character strings of [S2]
number of characters from the left side (the
side where the device address is smaller)
of the character string table starting with
[S1], and stores it in [D].
Reads the character strings for [S3]
number of character strings from the [S2]
byte of the character string table starting
with [S1], and stores it in [D].
Reads the character string data for [S2]
number of characters from the character
string table starting with [S1], and stores it
in [D] from the position of the [n]th byte.
Replaces the character string table starting
with [D] with the character strings of [S1].
The positions and number of characters
that can be replaced are specified with [p]
and [n].
Specifies the target of each instruction to
execute, described immediately before the
communication instruction. The target slots
are specified in [S1], and the target COM
port numbers or target connections are
specified in [S2].
Transfers the [n] bytes of data stored in the
area starting with [S] to external devices via
the COM port (SCU) or the LAN port (ET-
LAN) of the unit.
Transfers to external devices using the
built-in SCU and built-in ET-LAN of CPU,
and the add-on communication port of the
Page
"P.14-122"
"P.14-124"
"P.14-126"
"P.14-130"
"P.14-133"
"P.14-136"
"P.14-139"
"P.14-142"
Page
"P.15-2"
"P.15-4"
"P.15-4"
WUME-FP7CPUPGR-12