Engine Oil; Oil Change Procedures; Engine Oil Specifications; Hydraulic Fluid And Filter - Terex PT-30 Service Manual

Compact track loader
Hide thumbs Also See for PT-30:
Table of Contents

Advertisement

Compact Track Loader
16. Maintenance
Braced position
with pins
Figure 16-1
Stowed position
Figure 16-2

Engine Oil

Regular oil changes are necessary to maintain a
strong running engine. A normal oil change interval
of 250 hours or every six months is recommended.
This recommendation has been made to help
ensure proper lubrication during operation and to
prolong engine life under typical operating
conditions. Oil Change Procedures
1. Run the engine for a few minutes to warm the
engine oil.
Oil
Filter
Figure 16-3
with pins
Oil Drain Plug
2. Remove drain plug from bottom of the engine.
3. Drain oil into suitable container.
4. Remove engine oil filter, making sure the gasket
is also removed.
5. Apply a light coat of fresh oil to the new filter
gasket, then install new filter.
6. Tighten filter to specifications on filter label or
box.
7. Refill the engine to capacity with engine oil, as
specified.

Engine Oil Specifications

Due to the variations in the quality and performance
of commercially available oils, Terex Heavy Duty
Diesel Engine Oil – 10W30 is recommended. If
Terex lubricants are not available, use a substitute
meeting the following qualifications:
- API CH-4 multi-grade engine oil

Hydraulic Fluid and Filter

The hydraulic fluid should be changed every 500
service hours, and the hydraulic filter should be
changed every 250 hours. Hydrostatic components
require extremely clean oil for long service life.

Hydraulic Fluid and Filter Change

Procedures

Hot oil can cause personal injury. Make sure the
oil is cool before removing any components or lines.
Allow the machine to cool thoroughly and relax all
hydraulic circuits before performing this procedure.
Extreme care must be taken when changing the hydraulic
fluid. Before starting the procedure, make sure the
machine is in a clean working environment. Precautions
should be taken to prevent any debris from entering the
hydrostatic system.
Collect and contain liquids in a suitable
container. Dispose of all liquids according to local
regulations and mandates.
16-2
NOTICE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents