Table of Contents
Advertisement
Configuring the PC Software
Options from the Edit menu. In the Lines tab you then select the system ter-
minal from the Phone calls list.
3. Enter a telephone number in the Number box and confirm with Dial. Under
Windows XP you first click on the Dial icon and in the subsequent dialogue
activate Phone call.
4. The number you entered is displayed on the selected system terminal. Lift the
receiver to start dialling.
18.3
Setting up NET CAPI
With a CAPI driver (Common Application Programming Interface) Windows pro-
grammes are able to access services and functions of an ISDN card. With a
network-based CAPI, the OpenCom 100 allows the use of ISDN functions also by
workstation computers in which no ISDN card is integrated.
Requirements
You require an active IP network connection between the PC and the telephone
system.
Please note:
Installing the NET CAPI Driver
1. Call up the start mask from the product CD (see Configuring the PC Software on
page 208).
2. Select Software: NET CAPI Driver from the start mask and follow the pro-
gramme instructions.
212
Note: This note is not relevant to Windows XP or Vista. If the
"Phone Dialer" programme is not installed, you will have to
install it. To do this, you open the Control Panel and click on
Software. In the Windows Setup tab you activate the Con-
nections component.
Before installing the CAPI driver for the OpenCom 100, any
existent ISDN card must be removed and any CAPI drivers on
your PC must be de-installed.
Setting up NET CAPI
Advertisement
Table of Contents
