Configuring For A Remote Location - Aastra OpenCom 100 Mounting And Commissioning User Manual

®
DECT over IP

10.2.4 Configuring for a Remote Location

If you are using a DECT over IP base station in the same LAN as the OpenCom 100,
the IP address configuration and software loading procedure which are run when
a DECT over IP base station is started are handled by the OpenCom 100 using the
DHCP and TFTP protocols.
For the DHCP function to be available, the DECT over IP base station must be able
to reach the OpenCom 100 via a "Broadcast". In the case of a remote location this
kind of access - via a VPN connection for example - will not be possible. As in the
case of an IP system telephone, you will have to acquire the necessary system
software for the DECT over IP base station with the help of a TFTP server.
Local IP Address Configuration
The IP address configuration can be set up as a "local configuration" with the help
of an additional programme.
1. Call up Windows explorer. Browse to the communications system's product CD.
In the "Aastra" directory, double-click the "OM_Configurator.jar" file.
OpenMobility Configurator
146
rity, prevent them from being able to access each others'
computers. Activate the BSS Isolation option. You can also
stop unpleasant guests from using the system with a MAC
Address Filter – but this will not hold up users who know
about this function for long.
Configuration