Aastra OpenCom 100 Mounting And Commissioning User Manual page 136

Voice over IP (VoIP) VoIP System Telephones
IP parameter locally configured: Select the yes option to activate manual IP
address configuration. Select the no option to activate automatic IP address con-
figuration via BOOTP/DHCP.
IP address and Netmask: Enter an available IP address and the network mask to
be used by the VoIP system telephone.
TFTP server IP address and TFTP server filename: Enter the IP address and the
complete file name for the operating software of the VoIP system telephone (see
table on page 130).
Registration IP address and Registration port: This is where you usually enter
the IP address of the OpenCom 100 and the port number 8100.
Default gateway: Click on the Add parameter command to have this optional
entry field displayed. Then enter the IP address of the router ("Default Gateway").
Click on the Delete button to remove the optional parameter.
SYSLOGD: For monitoring purposes, VoIP system telephone messages can be sent
to a Syslog server. Activate the yes option and configure the SYSLOGD IP address
and SYSLOGD port settings to activate this function.
VLAN (Expert option - do not change the "no" setting in standard cases): To
improve transmission security or to enforce security guidelines, PC data trans-
mission and VoIP data transmission can be separated using this method. Activate
the yes option and enter the desired IP Phone VLAN ID for the VoIP data trans-
mission. Enter a value ranging from 1-4094. Data will always be transmitted
without a VLAN tag at the VoIP system telephone's PC access. If you activate the
yes option for PC traffic tagged on LAN interface, PC data will be labelled with
the PC VLAN ID at the LAN access. Please note that to change the VLAN settings,
the VoIP system telephone has to be restarted.
134