Table of Contents
Advertisement
Configuring the PC Software
18. Configuring the PC Software
Further possibilities of use can be implemented on a workstation computer with
the Windows operating system by installing drivers and programmes. You can find
the installation programmes required for this on the product CD that comes with
the OpenCom 100.
Proceed as follows to install extra software:
1. Log on under Windows as the administrator.
2. Insert the product CD.
If your PC is suitably configured, the CD will start automatically. Otherwise
select Run from the Start menu. Click on the Browse button to look for the pro-
gramme "cd_start.exe" on the CD. Confirm this with Open and OK.
3. Select the required option from the start interface. Follow the programme
instructions.
Further instructions for various options that are available are given below.
18.1
PC Offline Configuration
The offline configurator is a reduced system software. With the offline configurator
it is possible to create system configurations for various TC-system types – without
a connection to the live system. You configure a virtual system and later, aided by
the data backup, transfer the configuration to the running system.
Installing the Offline Configurator
1. Display the product CD contents in Windows Explorer. Search the "\OFC\"
installation directory for the offline configurator.
2. Start the StartCenter installation programme by double-clicking on
"Setup.exe". Following the installation assistant's instructions. Select the appro-
priate installation directory or apply the default.
208
PC Offline Configuration
Advertisement
Table of Contents
