Configuration
7.
Configuration
Configuration and programming of the OpenCom 100 is performed by the Con-
figurator, a special software application integrated into the system. The Configu-
rator is operated via the Web console, which can be run on any PC connected to
the OpenCom 100.
The OpenCom 100 Web console (this screenshot: OpenCom 150)
Using the Web console, you can:
■
perform the initial configuration of the OpenCom 100,
■
configure users of the OpenCom 100 and authorise them to use certain system
services,
■
carry out further system maintenance,
■
use PC-supported telephony functions,
■
read out call charge information,
■
access the OpenCom 100 telephone book.
The Web console has an integrated online help function that offers compre-
hensive information on configuration and maintenance of the OpenCom 100 (see
Loading the Online Help starting on page 81).
76
Note: In order to use all the new system software functions,
we recommend that you download the latest software from
our Web site at http://www.aastra.de or
http://www.aastra.com.