Configuration - Aastra OpenCom 100 Mounting And Commissioning User Manual

®
DECT over IP
■
G.711: uncompressed
■
G.723: compressed
■
G.729: compressed
10.2

Configuration

One of the DECT over IP base stations that is installed assumes coordination and
configuration of the DECT over IP functions ("DECT over IP Manager", OMM).
Select a base station that has a dependable data link to the OpenCom 100.
Go to the Telephony: Devices: DECT over IP page in the Configurator. Click on
New, to add a DECT over IP base station. Enter the MAC address of the base
station that you have selected to be the DECT over IP Manager. The MAC address
of the base station is located on its type label. Enter an IP address for this base
station. Confirm with Apply. Now click Change, to determine the DECT over IP
Manager. In standard cases, leave the Mode in the "IP address from the system
DHCP server" setting. Select the desired DECT over IP base station with the MAC
address (IP address) setting. Confirm with Apply.
If the OpenCom 100's DHCP server is not configured for static address assignment,
you first need to configure the IP address of the DECT over IP Manager with the
help of an additional programme (see Local IP Address Configuration starting on
page 146). Also change the Mode setting on the Telephony: Devices:
DECT over IP page to "IP address configured local" and enter there the configured
IP address for the DECT over IP Manager. All other base stations can be operated
using either a fixed IP address or an IP address assigned dynamically via DHCP.
Please refer to the information given in the chapter entitled LAN DHCP Server
starting on page 128.
140
Note: You can determine a second base station as additional
DECT over IP Manager ("Standby Device"). If the first
DECT over IP Manager fails, the second base station takes
over this critical function after some minutes and a reset of
the DECT network.
Note: A base station cannot be operated as a DECT over IP
Manager and a WLAN-Access Point simultaneously.You
should therefore use a DECT over IP base station which does
not have WLAN function as your DECT over IP Manager.
Configuration