Table of Contents
Advertisement
Voice over IP (VoIP)
4. Call up the Configurator and go to the page Telephony: Trunks: SIP Provider.
If your SIP provider is not listed, click on New. Otherwise select the precon-
figured SIP provider. Enter the Name and Domain (DNS name of the SIP ID).
Enter the SIP server's IP address under Proxy/Registrar and an IP address
under STUN Server and STUN Port where necessary. You can obtain more
information on this from your SIP provider. Click on Apply.
5. On the Telephony: Trunks: SIP Trunks page, click on New. Activate the Status
and enter a name for the account under Name. Select the SIP Provider. Enter
the relevant account information under User name, Password, Phone No. and
SIP ID. Click on Apply.
The SIP ID setting will be used while logging in to the SIP provider. Die Phone
No. setting denotes the external phone number used within the public phone
network. You can enter this number here to support system administration.
6. Call up the Telephony: Trunks: Route: New page once again. Enter "SIP", for
example, under Name, under Code the number "8" and select the SIP account
that was just configured for Bundle/SIP trunks 1. The SIP account is now
available with the dialling prefix "8". To use the SIP account by default, call up
the page Telephony: Trunks: Route and select the route External trunk.
Under Bundle/SIP trunks 1, select the SIP account you have just set up. Click
on Apply.
7. Check that the SIP connection is active on the System Info: Telephony:
Trunks page. Also check the SIP licence count on the System: Licences page.
Check the functionality by making an external call. You should assign the relevant
external number of the SIP account to the internal numbers on the page
Telephony: Call distribution: Incoming.
Note: The Telephony: Trunks menu page is only displayed
if you activate the Level: Expert option on the opening page
of the Configurator.
Quick Start
105
Advertisement
Table of Contents
