Installing The Memory Card; Safety Precautions - Aastra OpenCom 100 Mounting And Commissioning User Manual

Hide thumbs Also See for OpenCom 100:
Table of Contents

Advertisement

Installation
3.13

Installing the Memory Card

To operate the OpenAttendant and OpenVoice programme packages you require
a memory card (Compact Flash card Type I or Type II). The memory card contains
the following files:
the voice files and welcome/closing texts for the voicemail system OpenVoice
as well as messages which callers have left,
the audio files for the programme package OpenAttendant, with which you
can create individual information systems such as voice portals and voicemail
systems.
Only use high speed memory cards which are recommended by Aastra. Other
memory cards or "Microdrive" type memory cards may not be able to maintain the
required access speed.
For further information, please contact your local dealer or the Aastra sales
department.
The following instructions are intended for persons authorised to install such
memory cards, in the event that there is still no memory card available in the com-
munications system.

3.13.1 Safety Precautions

Please note:
DANGER!
Note: If you use a memory card other than one recom-
mended by Aastra, Aastra will not accept any responsibility
for the correct functioning of the OpenVoice and OpenAt-
tendant programme packages.
The memory card may only be installed by authorised per-
sonnel because the slot for the card is located on the mod-
ule board of the communications system.
High voltage inside the device.
Installing the Memory Card
61

Advertisement

Table of Contents
loading

Table of Contents