Features
1.
Features
The OpenCom 100 is a communications system for integrated voice and data com-
munication. The outstanding feature of this communications system is its modular
structure:
■
The OpenCom 131 is equipped with all the necessary ports for connecting
system telephones, IP system telephones, ISDN terminals and analogue ter-
minals. The system enables Internet/intranet data communication, CTI applica-
tions and the system configuration with a standard web browser. Additionally,
the OpenCom 131 is equipped with a slot for installing an "M100-AT" interface
card. With this interface card, the OpenCom 131 can be connected to analogue
trunk lines.
■
Even with the smallest OpenCom 130 version, it is possible to use all the most
important communications applications. The basic module enables telephony
with system telephones, IP system telephones, SIP system telephones,
standard SIP telephones, ISDN telephones and analogue terminals, Internet /
intranet data communication, CTI applications, sub-system operation and
system configuration using a standard Web browser.
The expansion module of the OpenCom 130 provides three slots for further
interface cards. Using different combinations of interface cards, the configu-
ration of the OpenCom 130 can be tailored exactly to your communications
requirements. The need for additional U
ports or more a/b ports can be met using one or more interface cards without
changing the system.
■
OpenCom 150 is a system that can be tailored exactly to your communications
requirements. Initially, the main module doesn't carry any telephony interfaces.
They can be added by means of additional interface cards. The main module
provides five slots for different combinations of interface cards. Unlike the
OpenCom 130, the main module of the OpenCom 150 is not divided into basic
and expansion modules.
■
All named variations of the OpenCom 100 (OpenCom 130 / 131 / 150) offer
additionally two special slots:
– One slot to incorporate a V.24 interface card. This card provides a serial port.
– One slot to incorporate doorstation equipment interface card.
ports supporting DECT, further S
pn
0
9
Need help?
Do you have a question about the OpenCom 100 and is the answer not in the manual?